Monitoring incoming calls, Automatic answering operation, Setting the unit to answer caiis – Panasonic KX-TG2670N User Manual

Page 54

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Automatic Answering Operation

When the unit answers a call, a greeting message is played and the
caller’s message is recorded. While recording, Answering will

flash on the base unit display.

•The total recording time (including greeting message) is

about

15 minutes.

If messages are recorded in noisy rooms, the time may

be shortened by up to 3 minutes.

•A maximum of 64 messages (including greeting message) can be

recorded.

Setting the Unit to Answer Caiis

Press I

ANSWER ON]

to turn on the answering system.

•The indicator lights and “Answer set” is

heard.

•The unit wiil announce the remaining

recording time if it is iess than 5 minutes.

•If you hear

“Memory full”, “Message

full”

is displayed on the base unit and

the ANSWER ON indicator flashes

rapidly, erase some, or all, of the

messages (p. 57).

I ANSWER ONI

and Indicator

•If you do not want the unit to answer calls, press

I

ANSWER ON

I

again to turn off

the answering system. The indicator light goes out and

“Answer off’

is heard.

•You can also turn on the answering system remotely using any other phone

(p. 69).

Monitoring incoming calls

While a call is being recorded, you can monitor it through the base unit
speaker.
To answer the call with the base unit speakerphone, press
I

DIGITAL SP-PHONEl.

For the handset, press S) O'' CS- The unit

stops recording.

If the cal) monitoring feature is not required, turn it off by pressing and

holding

[EXIT]

in the standby mode. Each time you press and hold

lEXlTl

in the standby mode, the feature will turn on or off.

While monitoring a call, you can turn the feature ON by pressing (^ or ®.

54

Advertising