Panasonic KX-TG2670N - Manual (Page 9)

Displays
Handset
0The display shows the dialed number,
call status, programming options and
directory items etc. If you subscribe to a
Caller ID service, caller information will
be displayed (p. 32). The number of new
calls will also be displayed.
(l)The directory icon displays when storing or viewing the directory items
{p. 42, 46).
d)The battery icon indicates the battery strength {p. 11).
Standby mode:
While the handset is off the base unit, the display becomes blank after
you finish using the handset (making/answering a call, viewing the Caller
List or directory list etc.). The handset can receive calls. The battery life is
conserved in this state. While the handset is on the base unit, the battery
icon and the number of new Caller ID calls are displayed in the standby
mode (p. 33).
Base unit
(i>
S U N 1 2 : 0 0 A M
_L 0
Message
_________ QP©
©The day and time and the number of
incoming messages are displayed in the
standby mode. The display shows the
dialed number, call status, programming
options and directory items etc.
If you subscribe to a Caller ID service, caller information will be
displayed {p. 32). The number of new calls will also be displayed.
©The directory icon displays when viewing the directory items (p. 46).
©The clock icon flashes with the day and time if the clock needs
adjusting (p. 22).
©The pager icon indicates the pager mode is on (p. 63).
Backlight LCD Displays
The handset and the base unit have the backlight LCD displays. Each
display will light when you start using the handset or the base unit, and
when a call is received. The handset display light will stay on for about 10
seconds after pressing a button or lifting the handset off the base unit.
The base unit display light will go out after use.
You can change the backlight color to orange for certain callers by storing
them in the directory (p. 41).