Operaifomi – Panasonic DATA LINK KX-TCL100-B User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Operaifomi
1
Adjust the remote unit’s
antenna so that it is vertical
and slide the POWER switch
on the remote unit to the ON
position.
oThe IN USE/RANGE
indicator will flash for a few
seconds while the remote
unit searches for a clear
channel.
Check that the IN USE/RANGE
indicator is solid green. The
indicator will remain on for
about 30 seconds.
olf the IN USE/RANGE
indicator is amber or red,
move the remote unit closer
to the bases unit until the
indicator turns green.
Start your communication
application.
oThe IN USE/RANGE indicator
will light while in use.
16
Advertising