1) antenna, 2) cover, 3) attenuator selection switch (att odb/iodb) – Panasonic RAMSA WX-RP921 User Manual
Page 6: 4) power indicator (power), 5) output connector, 6) screw adaptor, Major operating controls and their functions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
(1) Antenna
(2) Cover
Remove the cover when change the position of
Attenuator selection switch.
(3) Attenuator Selection Switch (ATT OdB/iOdB)
OdB:
Normally used this position.
10dB:
When the antenna input level is high or
interference noise produced, set the Attenua
tor selection switch to this position.
(4) Power indicator (POWER)
Lights in red when the power is supplied from the
receiver or distributor.
(5) Output Connector
Connect the coaxial cable between this connector
and the antenna input connector of diversity recei
ver or distributor.
(6) Screw Adaptor
-4-
Advertising