Press i halftone~l to, Press stamp to, Basic transmission settings – Panasonic 990 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Transmission Settings
nil
InJ
The Halftone setting is useful when sending photographs or illustrations with gray tones. Your machine is
preset to HALFTONE = Off. You can select either Fast or Quality mode.
Press I HALFTONE~l to:
□□ FAST
□□ QUALITY
HALFTONE
HALFTONE = Off
FAST
^^^UALTY
H^FTONE
HALFTONE = Quality
-^S-FAST
CZ3 QUALITY
HALFTONE
HALFTONE = Fast
The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
successfully transmitted page with a small
(g)
mark.
Press STAMP to;
STAMP
" STAMP
STAMP = Off
STAMP = On
□
NOTE ^
select HALFTONE, FAST or QUALITY, your machine wilt automatically select Fine
^------------------------- ^ Resolution.
2. When you store a document in memory, the Verification Stamp will stamp on the document if it
is successfully stored in memory. In this case the Verification Stamp is not a confirmation that
the document was successfully transmitted. If you wish to disable the use of the Verification
Stamp when storing document in memory, change the setting of Fax Parameter No. 28. (See
page 37)
3. To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04.
(See page 36)
43