Ddddd, Dddddd0 – Panasonic LF-1004AB User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TERM POWER Setting
The SCSI device at the terminating end requires a Terminator power supply. TERM POWER is a
function which supplies this terminal power. (The factory setting is “ON”.)
•When Terminator power is not supplied from another SCSI device:
Set TERM POWER to “ON”.
DDDDD
•When Terminator power is supplied from another SCSI device:
TERM POWER may be set to either “ON” or “OFF”.
DDDDDD0
-
28
-
Advertising