Self diagnostics failure code explanation, Failure – Panasonic NE-1757 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Self Diagnostics Failure Code Explanation

This oven monitors its operation and displays a Failure Code in the display window when a problem occurs.

FAILURE

CODE

PROBLEM

WHAT TO DO (BELOW)

F01

Temperature of exhaust air too High

1./2./374./5.

F03

Incoming Line Voltage too High

6./5./8.

F04

Incoming Line Voltage too Low

6./S./8.

Fit

Defective Upper Magnetron Circuit

1 ./7./9.

FI 2

Defective Lower Magnetron Circuit

1 ./7./9.

F21

Defective Upper Magnetron Circuit

1./7./9.

F22

Defective Lower Magnetron Circuit

1 ./779.

F33

Open Thermistor

1

Jim.

F34

Short In Thermistor

1 ./7./9.

F44

Defective Control Panel

1 ./779.

F51

Defective Upper Relay

1./7./9.

F52

Defective Bottom Relay

1 ./7./9.

1. Oven shuts off automatically. Disconnect the power cord from the wall receptacle.

2. Oven beeps continuously.

3. Oven resets for operation when cool.

4. Move oven to cooler location.

5. If problem persists call service agent.

6. Change voltage adjustment plug on rear of oven (See page 5).

7. Give Service agent the diagnostic code number so he can bring the needed parts.
8. Have an electrician check the voltage at the electrical outlet.
9. Disconnect the power cord from the wall receptacle, wait one minute and reconnect. If normal operation does not

resume, call service agent.

10. The above codes do not indicate all possible failures on the unit. Call your Service Agent if other codes appear.

-

14

-

Advertising
This manual is related to the following products: