Operation of dual wake-up system, Alarm time setting – Panasonic RCX230 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation of Dual Wake-Up System
This set incorporates a dual wake-up sys
tem. Each alarm wake-up time can be set
as shown below.
Alarm time setting
1
Press end hold the slarm 1 (or
2) display/adlust button.
The clock display shows 'i^;
"-
While pressing the alarm 1 (or
2) display/adjust button, press
and hold the time set buttons
until desired wake-up time ap
pears on the clock display.
Make sure the AM or PM setting is
correct.
When desired wake-up time appears
on the display, release the alarm 1 (or
2) display/adjust button. The present
time is restored on the clock display.
To make sure of the preset time,
press the alarm 1 (or 2) display/adjust
button.