Panasonic DMC-FS5 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparation
These menu settings make it easier to see the LCD monitor when
you are in bright places or when you are holding the camera high
above your head.
[!.CDl [LCD MODE] I
[OFF]
E* [AUTO POWER LCD]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
B [POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
(O) [HIGH ANGLE]:
The LCD monitor is easier to see when taking pictures with the
camera held high above your head.
•High angle mode is also canceled if you turn the camera off or [POWER SAVE] is activated.
•The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear differently from actuality on the LCD monitor. However, this does not affect the
recorded pictures.
•The LCD monitor automatically returns to normal brightness after 30 seconds when recording
in Power LCD mode. Press any button to make the LCD monitor bright again.
• It the screen is difficult to see because of light from the sun etc. shining on it, use your hand or
another object to block the light.
•The number of recordable pictures decreases In Auto Power LCD mode, Power LCD mode and
High angle mode.
This allows you to set the beep and shutter sound.
.1))
[BEEP LEVEL]:
Jl. [SHUTTER VOL.]:
m
(Muted)
[¿X] (Muted)
.)»(BEEP]
[<])]
{Low)
r>’ 1 (Low)
[<].))]
(High)
[¿ll(High)
))®
[BEEP TONE]:
j,® [SHUTTER TONE]:
[o)fi ]/[.#]/[#]
idO) [VOLUME]
Adjust the volume of the speaker to any of 7 levels.
•When you connect the camera to a TV, the volume of the TV speakers does not change.
Set the pattern of the guide lines displayed when taking pictures.
You can also set whether or not to have the recording information
|3g [GUIDE LINE]
displayed when the guide lines are displayed. (P38)
[REC. INFO.]:
[PATTERN]:
[OFF]/[ON]
•The [PATTERN] setting is fixed to [mJ in the intelligent auto mode.
[TRAVEL DATE]
Set the departure date and the return date of the vacation.
[OFF]/[SET]
• Refer to P57 for details
VQT1M97