Panasonic DMC-FS5 - Manual (Page 25)

Preparation
B> [FORMAT]
The built’in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
• Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional) when
formatting. Do not turn the camera off during formatting.
• If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
• If the card has been formatted on a PC or other equipment, format it on the camera again.
• It may take longer to format the built-in memory than the card.
• If the built-in memory or the card cannot be formatted, consult your nearest Service
Center.
T;Fp;^)lJSÀ:,âësiStânçé,#éais^^ ;%3i:Çïangiliàhi^âsi5tan.È^'pJ¥àsë''<^lk
■■■'Sehâ;êi^n1aîj;toï'lpj^|KcbHc
Set the language displayed on the screen.
[is [LANGUAGE]
[ENGUSH]/[DEUTSCH]/[FRANQAIS]/[ESPANOL]/[ITALIANO]/
[ VifTSC ]"'/[Bitig]
Not displayed on DMC-FS5P, DMC-FS3P
• If you set a different language by mistake, select [IJi] from the menu icons to set the desired
language.
Select this to display the camera’s features or [JITTER, SUBJ.
MOVE DEMO.].
DEMO
[DEMO MODE] [JITTER, SUBJ. MOVE DEMO.]
[AUTO DEMO]: The camera’s features are displayed as a
slide show.
(A)
Jitter detection demonstration
( b ) Movement detection demonstration
• In playback mode, [JITTER, SUBJ. MOVE DEMO.] cannot be
displayed.
• Press [DISPLAY] to close [JITTER, SUBJ. MOVE DEMO.].
Press [MENU/SET] to close [AUTO DEMO].
•[JITTER, SUBJ. MOVE DEMO.] is an approximation.
• [AUTO DEMO] has no TV output capability.
wsï
:»»--------(A)
VQT1M97
25