Auxiliary microphone, Telecoil pickup – Clarion Platinum Sound Processor User Manual

Page 21

Advertising
background image

16

Platinum Sound Processor User Guide

Auxiliary Microphone

You may find that using the auxiliary microphone is preferable in
some or all listening environments. The auxiliary microphone can
be hand-held or worn on your lapel or collar. You may want to
experiment with several microphone positions to find out which
location is best for you.

To use the auxiliary microphone:

1. Turn the Processor off by turning the program switch to the off

(o) setting.

2. Plug the auxiliary microphone into the auxiliary jack located on

the side of the Processor.

3.

Place the microphone in a secure position using the cable clip
provided.


4. Turn the Processor on by turning the program switch to

!, !!,

or
, depending on which program you want and adjust the
volume and sensitivity as necessary.


5. Turn your Processor off prior to removing the auxiliary

microphone.


When the auxiliary microphone is used, the microphone located in
the headpiece may remain on or shut off depending on how your
system is programmed by your audiologist.

IMPORTANT: The auxiliary microphone provided by Advanced
Bionics is designed to work specifically with your Processor. For
this reason, please do not use any microphone other than the one
designated by Advanced Bionics for the CLARION system.


Telecoil Pickup

The telecoil pickup is provided as an interface to audio induction
loop assistive listening systems, e.g., “room loops” and “neck

!

!

!

Advertising