Clarion Platinum Sound Processor - Manual (Page 7)

2 Platinum Sound Processor User Guide
Turning the control to the right (toward the larger end of the scale)
increases the volume. During your programming session, your
Processor will be adjusted so that the indicator on the volume
control when positioned halfway along the scale (12:00 position) on
the control panel represents the Most Comfortable Loudness level.
Sensitivity Control
The sensitivity control ( !
!
!
!
! ), located to the right of the volume
control, determines the quietest level of sound that will be picked up
from the environment by the microphone. Turning the control to the
left decreases the sensitivity so that softer sounds are not picked up
by the microphone. This may help eliminate background noise.
Turning the control to the right increases the sensitivity so that softer
or more distant sounds can be picked up by the microphone.
Headpiece Jack
The headpiece jack is located to the right of the sensitivity control.
The cable, which connects the Processor to the Headpiece, is
inserted here.
Dual Color LED Indicator
The LED (Light-Emitting Diode) indicator is a light located on the
control panel adjacent to the headpiece jack. The LED has three
primary functions: battery charge status, lock status, and
microphone/system status. Depending on the function, the LED will
illuminate with either a red or a green light. When the Processor is
turned on, the LED light will first indicate battery charge status,
followed by lock status. The microphone/system status may be
checked once lock has been obtained.