When a disc is seiected, When an album is selected, When a bookmark is selected – Yamaha CDR-HD1500 User Manual
Page 45: Press t'/nn to start copying, Memo
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC
When a disc is seiected:
When an album is selected:
When a bookmark is selected:
Press t'/nn to start copying.
The progress of Ihe copy process is shown in the display.
The unit applies the following settings (default.) if the CDR
copy menu settings (P.43) are never changed.
• Copy Method: "Digital Copy"
• Copy Level:
• Copy Speed:
• The OPC (Optimum Power Control) feature may start
automatically depending on disc conditions. In this case, the
message "OPC Adjust" appears on the display until the
adjustment is done (abotit 10 seconds) before the copy
• The progress of elapsed time for the track being copied may
vary by the data processing inside this unit.
To cancel copying, press □.
• If copying is canceled by pressing □, only the data that has
been recorded on the CD-R or CD-RW disc before the
cancellation remains on the disc. When "Digital Move"
(P.43) is selected, the original data on the HDD that have
already been copied to aC'D-R or CD-RW disc will be
‘ CD TEXT is copied only wfien selecting "Full Auto” in Ihe
CDR copy mode for a new CD-R or CD-RW disc.
|'\ S;;” 1" ' i„i
■! 1.". I ! fl '
! S ■"* .S. ■' !i 1
• When the Audio Master Quality Recording is set or the
message "Recording” appears on the display, you cannot
cancel the copy process by pressing n.
When copying has been completed, the operation of
the HDD and the CD automatically stops.
To carry out the finalization process (P.47), press