Yamaha CDR-HD1500 - Manual (Page 54)

ERASING DATA ON A CD-RW DISC
You can erase the data recorded on a CD-RW disc. New recordings can be made in the space created by erasing. The follow'ing four types of
erasing are possible wiih this unii.
ERASE
■►/II
Erasing last tracks
This operaiion erases the last track on a disc. “Last Track Erase"
cannot be performed if a CD-RW disc has been finalized, or only
one track has been recorded on the disc.
1 m Set a not-finalized CD-RW disc in the disc tray, then
press ERASE.
“Erase Last ?“ appears on the display.
Go to the next step wTen erasing only the last track. To erase
two or more tracks, rotate the MULTI JOG knob (press +/-, A
or ▼ on the remote control) to specity the track number (to start
erasing from).
Track to start erasing from Last track
To cancel erasing, press □,
2>
Press >/nD to start erasing.
“Erasing" Hashes on the display, and the level meter shows the
erasing progress.
Erasing all tracks
This operation erases till tracks recorded on a CD-RW disc, TOC
wall be erased also if iiC'D-RW disc has been finalized.
i ■ Set a CD-RW disc in the disc tray, then press ERASE
repeatedly until “Erase ALL ?” appears on the
display.
To cancel erasing, press □.
2i Press c>/nn to start erasing.
“Erasing” Itashes on the display, and the level meter show's the
erasing progress.
Erasing TOC
This operation erases TOC (Table of Contents) data from a finalized
CD-RW disc. After erasing TOC data, you can record another track
data onto the CD-RW disc.
1 ■ Set a finalized CD-RW disc in the disc tray, then
press ERASE.
“Erase TOC T' appears on the display.
To cancel erasing, press n.
2i
Press t>/nn to start erasing.
“Erasing" Hashes on the display, and the level meter shows the
erasing progress.
lUletno::
The TOC indicator turns off W'lren “TOC Erase” has been com­
pleted.
48