Converting digital/analog output signals (dac mooe, 1 m press menu while this unit is in the stop mode, Memo – Yamaha CDR-HD1500 User Manual

Page 77

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CONVERTING DIGITAL/ANALOG OUTPUT SIGNALS (DAC MOOE

This iinil has the digital-analog converter (DAC) mode. When the DAC- mode is turned on. the unit outputs audio sources (audio signals input
from the input jacks) from the both digital (OPTICAL and C'OAXIAL) and analog (ANALOG) jacks.

COMPLETE MULTIJOG MENU

« о

'cH-

o' ■

■ Й

Ò a

J“

INPUT

INPUT ANALOG □ >/nc

REC LEVEL

MENU

1

m

Press MENU while this unit is in the stop mode.

The display changes for the menu ileni seleclion.

2.

Rotate the MULTI JOG knob (press

+/-,

a

or ▼ on the

remote control) to select “DAC Mode”.

I } D ! I

3>

Press the MULTI JOG knob (ENTER on the remote

control) to enter the DAC mode.

4.

Press INPUT to select the input sources (OPTICAL,

COAXIAL, or ANALOG).

The lamp for the selected input lights up and the unit outputs
the input source from ANALOG LINE OUT and DlCilTAL
OUT (OPTICAL/COAXIAL) jacks.

Memo

• When OPTICAL or COAXIAL is selected, the MULTI JOG

knob functions as a volume control.

• When ANALOG is selected, the ANALOG REC LEVEL

control functions as a volume control.

5i Any of the following operation cancel the DAC mode

and start normal operation.

• Press >/nn to play the drive that had been selected before

entering the DAC mode.

• Press П or COMPLETE to set this unit in the stop mode.

• Press MENU to reliirn to the menu item selection.

m
Л

Tl

m

c

m

СЛ

71

Advertising