Yamaha CDR-HD1500 - Manual (Page 81)

SYSTEM UTILITY
■ Starting playback automatically
(Auto Play)
Yoii can sei the auto play function which automatically starts
playback when the power of this unit is turned on. Using an
external timer with this feature enables timer playback.
1
■ Carry out steps 1 to 3 in “Checking the firmware
version (Firm. Version)” (P.73).
The display changes for the system utility item selectiori-
2m Rotate the MULTi JOG knob (press +/-, a or ▼ on the
remote controi) to select “Auto Piay”.
1 ! I ! ' ! ’
3.
Press the MULTI JOG knob (ENTER on the remote
control) to display the current setting.
■ Updating the firmware version
(Firm. Update)
This menu is prepared for the expansion of the lunclions in the
future.
Rotating the MULTI JOG knob (pressing +/-, A or ▼ on the
remote control) switches the setting between “Auto Play On"
and "Auto Play Off”.
: Memo::
Initial setting is ”Auto Play Off’.
4. Press the MULTI JOG knob (ENTER on the remote
control) or COMPLETE.
The auttt play function is set to on or (tff.
If the auto play function is set to on, the setfiitg will be applied
when the power of this unit is turned on the next lime.
• This unit plays data on the drive that had been last selected
when the power of this unit w'as Iasi turnerl off.
• This unit plays in the playback mode (such as random play)
that had been liist set when the power of Ihis unit was last
turned off.
5.
To carry out timer playback, connect the power cable
of this unit to an external timer, then set the timer.
Memo
The setting for the timer recording takes precedence over the setting
tor the auto play function. If the timer recording (P.32) is set, this
unit starts recording when the power of this unit is turned on the
next lime even wdien “Auto Play On” is selected.
m
n
Tl
m
c
m
(/)
75