Document Outline

• Explanation of Graphical Symbols
• CAUTION: READ THIS BEFORE OPERATING THIS UNIT.
• CONTENTS
• OVERVIEW
• FEATURES
  • Digital Sound Projector
  • My beam
  • Cinema DSP Digital
  • Versatile Remote Control
  • lnte\l/Beam
    • AUTO SETUP (IntelliBeam)
    • Compatibility with the Newest Technologies
• USING THIS MANUAL
  • Notes
    • 1 Install this unit In your listening room.
    • 2 Connect this unit to your TV and other external components.
    • 3 Prepare the remote control and turn on the power of this unit.
    • 4 Run AUTO SETUP.
    • 5 Play back a source.
    • 6 Change the beam modes and/or CINEMA DSP settings.
    • 7 Run MANUAL SETUP to fine-tune settings and/or set remote control codes.
• SUPPLIED ACCESSORIES
  • QD CD CD
• CONTROLS AND FUNCTIONS
  • Front pane!
    • © OPTIMIZER MIC jack
    • © Front panel display
    • @ Remote control sensor
    • © INPUT
    • ® VOLUME-/+
    • ® STANDBY/ON
    • Nates
  • Front panel display
    • © NIGHT indicator
    • © SLEEP indicator
    • © Decoder indicators
    • 0 Volume level indicator
    • 0 Multi-information display
  • Rear panel
    • © RS-232C/REMOTE IN terminals
    • © DVD COAXIAL DIGITAL IN jack
    • © AUX OPTICAL DIGITAL IN Jack
    • © TV/STB OPTICAL DIGITAL IN jack
    • © TV/STB AUDIO IN jacks
    • ® VCR AUDIO IN jacks
    • © SUBWOOFER jack
    • © VCR VIDEO IN jack
    • ® DVD/AUX VIDEO IN jack
    • ® DVD/AUX COMPONENT VIDEO IN jacks
    • ® STB VIDEO IN jack
    • ® STB COMPONENT VIDEO IN jacks
    • ® VIDEO OUT jack
    • ® COMPONENT VIDEO OUT jacks
    • ® IR-OUT terminal
    • ® AC IN
  • Remote control
    • 0 Infrared window
    • (2) STANDBY/ON
    • (3) Transmission indicator
    • 0 Input selector buttons
    • ® VOL MODE
    • ® AUTO SETUP
    • ® Numeric buttons
    • ® STEREO
    • ® Sound field program buttons
    • ® CH LEVEL
    • ® Cursor buttons ^ / Yz / <] / |>, ENTER
    • © TEST
    • ® VOLUME+/-
    • ® MUTE
    • © TV INPUT
    • ® DVD playerA^CR control buttons
    • © My beam microphone
    • ® TV POWER
    • ® AV POWER
    • @ INPUT1/INPUT2
    • (g) MACRO
    • ® SLEEP
    • @ INPUTMODE
    • (g) Beam mode buttons
    • @ SURROUND
    • (g) MY BEAM
    • @ TruBass
    • @) MENU
    • (g Operation mode selector
    • @ RETURN
    • (g) TVVOL+/-
    • ® CH+/-
    • ® TV MUTE, CODE SET
• INSTALLATION
  • Before installing this unit
    • Parallel installation
    • Corner installation
    • ■ Installation examples
      • Example 1
      • Example 2
      • Example 3
    • ■ Using a metal wall bracket
    • ■ Using a TV stand
    • ■ Using a stand
      • stand
    • ■ Using a rack
      • Note
    • ■ Affixing this unit
      • Notes
• CONNECTIONS
  • For audio input For video input
  • Conneeting a TV
    • ■ Audio connections
    • ■ Video connections
      • Note
        • Cables used for audio connections
        • Cables used for video connections
  • Connecting a DVD player/recotder
    • ■ Audio connections
    • ■ Video connections
      • Notes
        • Cables used for audio connections
        • Cables used for video connections
  • Connecting a VCR
    • ■ Audio connections ■ Video connections
      • Nate
        • Cables used for audio connections
        • Cables used for video connections
    • ■ Audio connections
    • ■ Video connections
      • Cables used for audio connections
      • Cables used for video connections
  • Connecting a digital airwave tuner
    • ■ Audio connections
    • ■ Video connections
      • Cables used for audio connections
      • Cables used for video connections
  • Connecting other external components
    • Hote
      • Cables used for connections
  • Connecting a subwoofer
  • Connecting the power supply cable
  • About the RS-232C/REM0TEIN/IR-OUT terminals
• GETTING STARTED
  • Installing batteries in the remote control
    • 1 Press and hold the ^ mark on the battery cover and then slide off the cover.
    • 2 Insert the two supplied batteries (AA, R6, UM-3) into the battery compartment.
    • 3 Close the battery cover.
    • Notes
  • Operation range of the remote control
    • Nates
  • Using the remote control
  • Turning on the power
    • Nate
• USING SET MENU
  • Displaying the OSD
    • Note
  • The flow Chart Of SET MENU
    • Look for a remedy.
    • Play back audio signals or adjust the settings for the beam mode and the CINEMA DSP.
    • Run MANUAL SETUP.
• CHANGING OSD LANGUAGE
  • 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
  • 4 Press ^ ^ to select the language and then press ENTER.
  • 2 Press MENU on the remote control.
  • Press / N7 to select LANGUAGE SETUP and then press ENTER.
• AUTO SETUP (IntellìBeam)
  • The flow Chari of AUTO SETUP
    • *2 *3
  • Installing the optimizer microphone
    • Notes
    • Note
  • Using AUTO SETUP (InlelllBeam)
    • ■ Assembling the supplied cardboard microphone stand
      • Notes
        • 1 Press STANDBY/ON on the front panel or on the remote control to turn on the power of this unit.
        • 3 Press MENU on the remote control.
        • Press ^ ^ on the remote control to select AUTO SETUP and then press ENTER.
        • Set the operation mode selector to YSP to switch to the operation mode of this unit.
        • Check that the following screen is displayed on your TV.
        • 10 Disconnect the optimizer microphone from the OPTIMIZER MIC jack on the front panel.
        • Press ENTER to confirm the results or press RETURN to cancel the results.
        • ■ Error messages for AUTO SETUP Before the AUTO SETUP procedure starts
        • While the AUTO SETUP procedure is in progress
• USING THE SYSTEM MEMORY
  • Convenient usage of the system memory
    • 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
    • 2 Press MENU on the remote control.
    • 3 Press ^ ^ to select MEMORY and then press ENTER.
    • 4 Press ^ to select SAVE and then press ENTER.
    • Press <1 / [> to select MEM0RY1, MEM0RY2 or MEM0RY3 and then press ENTER.
  • Loading settings
    • 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
    • 2 Press MENU on the remote controi.
    • 6 Press ENTER again.
    • 7 Press MENU to exit.
    • 3 Press ^ ^ to select MEMORY and then press ENTER.
    • 4 Press to select LOAD and then press
    • ENTER.
    • 6 Press ENTER again.
    • 5 Press ^ / xz to select MEMORY1, MEMORY2 or MEMORY3 and then press ENTER.
    • 7 Press MENU to exit.
• PLAYBACK
  • Selecting the Ingut source
    • ■ Front panel operations
    • ■ Remote control operations
  • Playlag back sources
    • Note
  • Adjusting the volume
    • Notes
    • Note
• ENJOYING SURROUND SOUND
  • Note
  • 5 beam
    • Press 5BEAM on the remote control to select the 5 beam.
    • 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
    • 2 Press one of the beam mode buttons
    • (5BEAM, ST+3BEAM or 3BEAM) to select the desired beam mode for 5.1-channel play back.
    • Notes
  • Stereo plus 3 beam
    • Press ST+3BEAM on the remote control to select the stereo plus 3 beam.
    • Nate
  • Steam
    • Press 3BEAM on the remote control to select the 3 beam.
    • Notes
    • ■ Decoder indicators
    • Surround modes and recommended sources
      • Notes
  • Enjoying 2~channei sources in surround sound
    • i
  • Adfusting surround mode parameters
    • 1 Repeat steps 1 and 2 in “Enjoying 2-channef sources in surround sound” on page 45 and select PL II Music or Neo:6 Music.
    • 2 Press to select the parameter.
    • When Dolby Pro Logic II Music is selected
      • PANORAMA
      • DIMENSION
      • CT WIDTH
    • When DTS Neo:6 Music is selected C. IMAGE
      • 3 Press <1 /1> to configure the parameter.
• ENJOYING STEREO SOUND
  • Stereo playback
    • Nates
      • 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
      • Press STEREO on the remote control to select the stereo playback as a beam mode.
• PLAYING BACK SOUND CLEARLY (My beam)
  • Note
  • Using auio-atljust function
    • 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
    • Press and hold MY BEAM on the remote control more than 2 seconds.
    • Nates
  • Using manuahadjust function
    • 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
    • 2 Press MY BEAM on the remote control.
    • Press <| /1> while MY BEAM is displayed to adjust the angle.
• USING SOUND FIELD PROGRAMS
  • Note
  • What is a soanh fieih?
    • ■ Elements of a sound field
      • Early reflections
      • Reverberations
  • Sound field program descriptions
    • Not0
  • Taming on CINEMA DSP programs
    • Notes
    • ■ Music programs
    • i
      • ■ Movie programs
        • ■5ci-Fi
    • i
    • i
      • ■ Sports program
  • Turning off CINEMA DSP pmgrams Aiiusting CINEMA DSP effect levels
• USING THE VOLUME MODE (Night listening mode/TV volume equal mode)
  • 2 Press VOL MODE on the remote control repeatedly to select NIGHT:CINEMA, NIGHT:MUSIC, TV EQUAL VOL or OFF.
  • 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
  • i
  • i
  • I
    • Note
• USING BASS SOUND ENHANCER (TruBass)
  • Nate
    • Press C63 on the remote control repeatedly to select TruBass MID or TruBass DEEP.
    • 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
    • 2 Press C0]> on the remote control.
• USING THE SLEEP TIMER
  • Set the operation mode selector to YSP to switch to the operation mode of this unit.
  • Press SLEEP on the remote control repeatedly to set the amount of time for the sleep timer.
  • 3 Wait for a few seconds without operating this unit to confirm the setting for the sleep timer.
  • ^ I ^
  • Canceling the sleep timer
    • 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
    • Press SLEEP on the remote control repeatedly so that SLEEP OFF appears in the front panel display.
    • Wait for a few seconds without operating this unit to confirm the setting for the sleep timer.
• MANUAL SETUP
  • SOUND MENU
  • BEAM MENU
  • INPUT MENU
  • DISPLAY MENU
  • Using MANUAL SETUP
    • 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
    • Press ^ / N7 to select MANUAL SETUP and then press ENTER.
    • 2 Press MENU on the remote control.
    • 5 Press ^ / <1 /1> and ENTER to configure
    • each parameter.
    • 6 Press MENU to exit.
  • BEAM MENU
    • ■ SETTING PARAMETERS (Setting parameters)
      • INSTALLED POSITION (Installed position of this unit)
      • INSTALLED HEIGHT (Installed height of this unit)
    • ■ BEAM ADJUSTMENT (Beam adjustment)
      • Notes
      • Hots
        • HORIZONTAL ANGLE (Horizontal angle)
        • VERTICAL ANGLE (Vertical angle)
        • BEAM TRAVEL LENGTH (Beam travel length)
      • Note
        • FOCAL LENGTH (Focal length)
        • TREBLE GAIN (Treble gain)
    • ■ IMAGE LOCATION (Image location)
      • LEFT (Left)
    • ■ TONE CONTROL (Tone control)
      • TREBLE (Treble)
      • BASS (Bass)
      • RIGHT (Right)
    • SUBWOOFER SET (Subwoofer set)
      • BASS OUT (Bass out)
      • CROSS OVER (Cross over)
      • LFE LEVEL (Low-frequency effect level)
      • DISTANCE (Distance)
    • ■ MUTE LEVEL (Muting level)
    • ■ AUDIO DELAY (Audio delay)
    • ■ ROOM EQ (Room equalizer)
      • MOUNTING (Mount type)
      • REFLECTING (Reflectivity type)
    • ■ DD/DTS Dynamic Range
    • (Dynamic range of Doiby Digitai and DTS signais)
    • ■ INPUT ASSIGNMENT (Input assignment)
    • ■ INPUT MODE (Input mode)
    • ■ INPUT TRIM (Input trim)
    • ■ INPUT RENAME (Input rename)
      • 1 Press <| / [> to place the _ (underbar) under the space or the character you want to edit.
      • Press ^ ^ to select the desired character.
    • ■ DIMMER SET (Dimmer settings)
      • STANDARD DIMMER (Standard dimmer)
      • AUTO DIMMER (Auto dimmer)
      • 3 Repeat steps 1 to 3 to rename each input.
      • 4 Press ENTER to exit.
    • ■ OSD SET (OSD settings)
      • OSD SHIFT (OSD shift)
      • OSD BACK COLOR (OSD background color)
    • ■ UNIT SET (Unit settings)
      • Note
• ADJUSTING THE AUDIO BALANCE
  • Using the test tone
    • 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
    • 2 Press TEST on the remote control.
    • 3 Press ^ ^ to select the channel you want to adjust.
    • i
    • i
      • 4 Press <| / [> to adjust channel volumes.
  • Using the audio output being piayerback
    • 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
    • 2 Press CH LEVEL repeatedly (or press CH LEVEL and then ^ to select the channel you want to adjust.
    • t
    • 1
      • i
      • i
        • Note
          • 3 Press <1 /1> to adjust channel volumes.
          • 4 Wait for a few seconds without operating this unit when you have completed your adjustment.
        • Notes
• SELECTING THE INPUT MODE
  • 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
  • 2 Press one of the input selector buttons on the remote control to select the desired input source.
  • Ndm
    • • AUTO
    • • DTS
    • • ANALOG
    • Press INPUTMODE on the remote control repeatedly to toggle between input modes.
• ADJUSTING SYSTEM PARAMETERS
  • Using the system parameters
  • Setting the mMORY PROTECT
  • Setting the MAX VOLUME
  • Setting the TURN ON VOLUME
  • Setting the DEMO MODE
  • Setting the FACTORY PRESET
    • 5 Press <1 / t> to switch between PRESET: RESET and PRESET: CANCEL.
    • 6 Press STANDBY/ON on the front panel to set this unit to the standby mode.
• REMOTE CONTROL FEATURES
  • Setting remote control codes
  • Controlling other components
    • ■ Operating your TV
      • Set the operation mode selector to TV/AV and then press TV to select TV as the input source.
      • © TV POWER
      • © TVINPUT1/2
      • @ Numeric buttons
      • ® CH+/-
      • ® TVVOL+/-
      • ® TV MUTE
      • © TV INPUT
      • ® AV POWER
      • © Numeric buttons
      • @ MENU
      • ® Cursor buttons ^ / <] / t>, ENTER
      • © RETURN
      • © Operation buttons for DVD and VCR players
      • Set the operation mode selector to TV/AV and then press VCR to select VCR as the Input source.
    • ■ Operating your STB (CATV/Satellite tuner)
      • Set the operation mode selector to TV/AV and then press STB to select STB as the input source.
      • © AV POWER
      • © CH+/-
      • @ Operation buttons for DVD and VCR
      • © AV POWER
      • © Numeric buttons
      • @ CH+/-
  • Using the TV macro
    • Notes
    • Setting macros for the TV with the tuning capabiiity
• TROUBLESHOOTING
  • ■ General
  • Remote control
• GLOSSARY
  • Audio formats
    • ■ Dolby Digital
    • ■ Dolby Pro Logic II
    • ■ Dolby Surround
    • ■ DTS (Digital Theater Systems)
    • Digital Surround
    • ■ DTSNeo:6
    • ■ PCM (Linear PCM)
  • Audio information
    • ■ LFE 0.1 channel
• SPECIFICATIONS
  • SATELLITE TUNER
• ^YAMAHA
• YSP-nOO
  • Subwoofer