Analog input jacks (unbalanced type pin-jacks), Optical digital input/output jacks, Digital input selector – Yamaha DTR2 User Manual
Page 8: Coaxial digital input/output jacks, Remote jack
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
NAMES OF CONTROLS
Rear Panel
® ANALOG INPUT jacks (unbalanced type pin-jacks)
When these jacks are used for recording, adjust the
input level with the REC LEVEL control.
(D
ANALOG INPUT selector
Used to select the analog input jacks between
balanced type (XLR) and unbalanced type.
(D
ANALOG OUTPUT jacks (unbalanced type pin-jacks)
Maximum output level is 2 V.
© OPTICAL DIGITAL INPUT/OUTPUT jacks
These optical digital I/O jacks are based on EIAJ CP
340 specifications.
® DIGITAL INPUT selector
Used to select the digital input jacks between OPTICAL
and COAXIAL.
® ANALOG INPUT terminals (balanced type Cannon-
jacks)
The second pin is HOT.
© ANALOG OUTPUT terminals (balanced type
Cannon-jacks)
Reference level is +4 dBm.
Pin assignment of the balanced type (XLR-3-31/XLR-
3-32) connectors
COAXIAL DIGITAL INPUT/OUTPUT jacks
These coaxial digital I/O jacks are based on lEC 958
specifications.
REMOTE jack
Connect to the plug of the supplied remote control
transmitter.
Never connect a remote control unit other than the
supplied remote control transmitter.
8