6 • operation, 1 playback of previously-recorded cds, 00 00 bd – Yamaha YPDR601 User Manual
Page 25: Xx 00 ad, Xx 00 ad 10, Xx 00 ad 30, Xx 01 cd
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6 • Operation - Playback of previously-recorded CDs
6 • Operation
There are several basic methods of using the YPDR described here. Many of the
basic operations are common to all methods.
6.1 Playback of previously-recorded CDs
The YPDR may be used as a CD player to play back discs recorded on the
YPDR.
Switch on the power to the main unit, and then switch on the controller.
The LED display on the controller will show -- --
Press the OPEN/CLOSE key on the front of the main unit. The disc tray will
open.
Place the disc, label upward, in the tray, and press the OPEN/CLOSE key to
close the tray. The "DISC" indicator on the main unit will flash as the disc mech
anism initializes.
When the disc initialization is complete, the "DISC" indicator will light steadily,
and the display on the controller will read:
"xxOlCd
", where
"xx"
corre
sponds to the total number of tracks on this disc. This display will be shown if
the disc is (i) either a commercial CD, or (ii) a disc which has been recorded on
the YPDR using the TOC AFTER mode. If the TOC PRE mode has been used to
record the disc on the YPDR, the display will be different, as shown below:
6.1.1 Disc type displays
Display
Meaning
00 00 bd
A blank disc which has no data (TOC or audio) recorded
on it
XX 00 Ad
TOC AFTER mode, recording started, but not yet com
plete (ie TOC has yet to be written)
00 00 Ad 10
TOC PRE mode, 10 second track length, TOC recorded,
but audio data unrecorded
00 00 Ad 30
TOC PRE mode, 30 second track length, TOC recorded,
but audio data unrecorded
XX 00 Ad 10
TOC PRE mode, 10 second track length, recording not
completed (not all tracks have been recorded)
XX 00 Ad 30
TOC PRE mode, 30 second track length, recording not
completed (not all tracks have been recorded)
XX 01 Cd
Completed disc (either PRE or AFTER) or commercial CD
In the table above, "xx" always represents the number of tracks on the disc.
When the disc initialization is complete, the STOP key on the controller will
light, and the "DISC" indicator on the main unit will stop flashing and will light
steadily.
YPDR
Operation - 21