Using the tape out jacks – Yamaha MT100II User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
USING THE TAPE OUT JACKS
The tape out jacks can be used to feed the tape outputs to an external mixer. In mixdown, individual tracks can be processed using
a signal processor, which receives signal from the TAPE OUT jack and the output of which is returned to a channel's INPUT jack.
See diagram.
Processing Individual Tracks In Mixdown Using TAPE OUT Jacks
INPUT SELECT switch on channel
1 is set to MIC/LINE.
19
Advertising