Power switch, Dc in jack (dc12v) – Yamaha MT100II User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

® POWER Switch

Press the POWER switch once to turn power ON, a second

time to turn power OFF. When the power is ON, the

POWER LED above the LED peak meters on the MT100II

top panel will light. Make sure that the input faders are set

to "0” and the AUX RETURN level control is set to "MIN”

before turning power on.

{Note] A muting function operates for five seconds after

power is initially turned on, after which the recorder

can be operated.

®DC IN Jack (DC12V)

The DC output cord from the YAMAHA PA100 AC Adaptor

supplied with the MTIOOn should be plugged in here. The

AC Adaptor should be plugged into a convenient AC wall

outlet.

Caution: Use only a YAMAHA PA100 AC Power Adaptor

to power your MT100H. Other AC adaptors can cause

faulty operation, and may even permanently damage your

MTIOOn.

Advertising