То staht/stop massage action, Staht/stop massage action – Panasonic EP574 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

то

STAHT/STOP MASSAGE ACTION

Before using, lirsl read all ol Ihe mstruclmns including the warnings and safely precautions as

well as the section on programmed and manual massage

(BEGINNING OPERATION)

1 T

d

oparale the massage, push left side button

■ Check I

d

be sure Ihe DperatiDn indicalor lamp is lit

If you wish I

d

slop the massage temporarily, push nghl side bullón

The massage heads will slop where they are

■ Check to be sure the operatiDn indicator goes out To resume massage press left side button

After final use, push Ihe left side button to restore massage heads

■ The massage heads will go up, spread oul and stop in the reslore position With the heads m this position

you can sil comfortably, using the massager as a regular chair

• Be sure !□ store the controller in the pocket on Ihe side of the left armrest when nol in use

Do you want programmed or manual operation'?

IMPORTANT NOTE If you have never had a massage, we suggest you start in the manual mode

■ If you wish to select the programmed massage, move the slide

cover to lower position completely

■ If you wish to select the manual massage, move the slide cover

to upper position completely (See NOTE)

NOTE Be sure to check position of slide caver

For manual operation, slide cover must depress the sensor
pin located at upper left of the slide track

Automatic timer for massage lounger

■ To prevent excessive massaging there is a built-in timer which after approM 15 minutes of operation

will automatically turn the massage heads to the "restore” position and stop their motion

■ Turning on the operation switch while the massage heads are moving to the restore position will reset

the time for another 15 minutes (approximately)

■ If the programmed massage button is pushed, the unit will stop after finishing the program

Advertising