Display select, Search mode screen, Display index screen – Panasonic PV C2020 User Manual

Page 28: Select the recording number, Start search, To calculate the index number, Tape operation (continued)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Tape Operation (continued)

Direct Access

(For Normal and/or Timer recordings)

Go directly to the desired recording.

Display SELECT

1

SEARCH

SEARCH MODE screen.
Press SEARCH in
Playback or Stop mode.

• If there are no Timer

Recordings on the Program
Index List, go to step 3.

2

SELECT SEARCH MODE

ZERO SEARCH

INDEX SEARCH

PROGRAM END SEARCH
PROGRAM INDEX SEARCH

SELECT
SET

END

A

▼ KEY

► KEY

SEARCH KEY

Display INDEX screen.

1) Press AV

to select
“INDEX

SEARCH.”

2) Press ► to

display.

This screen appears only if
there are Timer Recordings.

Select the recording
number.

prpcc

NUMBERED
keys.

To calculate number, see below.

Start search.

Press FF or REW.

• When search is

finished, playback

begins.

To calculate the Index Number

Example 1:
If you are watching recording 4 and you want to watch
recording 2, enter 3 in step "S” and press REW.

1

2

3

4

5

6

7

Each time recording is made, an invisible

index mark is placed on the tape. When

timer recordings are made, program

index and information are also included.

These index marks can be used to

access or scan recordings.

VHS Index Search System is ...

Example 2:

If you are watching recording 2 and you want to watch

recording 6, enter 4 in step “3" and press FF.

1

2

3

4

5

6

7

NOTE: I indicates start points of each recording

28

Make each entry within 10 seconds, or

the Index Search mode will be canceled.

If these VHS Index Search Systems are

started very close to an index mark, that

index mark may not be counted in the

search.

For assistance, call 1-800-211-PANA(7262)

Advertising
This manual is related to the following products: