Panasonic rx-ds28 - Manual (Page 9)

FM MODBBP
■ CD PLA'
m
r -
t.. h/(
V ' ■ - U
r
S h / r L J U
y
Listening to radio broadcasts
Rflcfnnftig te 17riT7T?J1 ^7^3^
Oniftigl)
Make sure you have completed the procedure for "Presetting radio
broadcasts" (on page 8).
□ Press BAND to select “FM” or “AM”.
Every time you press the button; FM AM
Press TUNE MODE to display the preset indicator.
The unit is set to the preset tuning mode.
Press -/K^ or +/»H to seiect the preset channel.
Adjust the volume.
PfeSaìftiQ 03 fessgifeED eOdiSaiB CteicQ
POSO feaSDD OKlanngEÌl
Press BAND to select “FM” or “AM”.
Every time you press the button: FM <-> AM
Press TUNE MODE to Clear the preset indicator.
The unit is set to the manual tuning mode.
Press -/K^ or +/►►! to tune in the station.
Adjust the volume.
Automatic tuning:
This is a simple way of tuning in stations that have not been preset.
Keep -/W^ or +/►►! depressed, and release it when the frequency
display starts to change. A station with good reception is automatically
selected and the selection process then stops.
To stop automatic tuning, press or +/►►! again.
RHffl
Automatic tuning may stop without a station having been tuned in
when interference is encountered on neighbouring airwaves. In such
a case, tune in a station by tapping —or
Adjusring the antennas Q
For FM reception:
Pull out the telescopic antenna and adjust its length and angle for
optimum reception.
For AM reception:
Turn the unit in the direction which gives the best results.
Reference
Radio broadcasts may be hard to receive in a moving vehicle or in a
building because the signal may be weakened. In such cases, use the
unit near a window.
When there is a lot of noise in an FM stereo
broadcast E]
Reduce the interference by setting the sound to monaural.
Example:
When an FM stereo program is being received;
Press FM MODE/BP.
"[MONor' is displayed.
To return to stereo reception, repeat the same procedure and turn off
the IMONOI display.