Unit decoder with doiby digitai ampiifier speaker, Dts (digital theater systems), Caution for optical digital audio – Panasonic OMNIVISION PV-DM2791 User Manual
Page 13: Note, Optical digital audio cable (optional)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ Unit Decoder with Doiby Digitai Ampiifier Speaker
or
dtS
(digital theater systems)
When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts bitstream
is output from the unit Optical digital audio output connector. When the unit is connected to a
Dolby Digital decoder or dts decoder, you can enjoy theater-quality audio in your home.
[An optical digital audio cable (optional) is required when an optional Dolby Digital decoder or
dts decoder is used.]
Notes on connecting an Optical
digital audio cable (optional)
• Remove dust protection cap from
Optical digital audio output. Firmly
connect the cable to the connector.
• Always reattach the dust protection
cap when connector is not in use.
Dust protection cap
Caution for optical digital audio
output connector:
• When connecting an amplifier (with
an Optical digital input connector)
which does not contain the Dolby
Digital or dts decoder, be sure to
select “OFF” at “Dolby Digital” and
“OFF” at “dts” of the Settings for
DVD Operation “AUDIO OUTPUT’
(see page 60). Otherwise, any
attempt to play DVDs may cause
such a high level of noise that it may
be harmful to your ears and damage
your speakers.
• When a dts decoder is connected,
please select “Bitstream” at “dts" of
the Settings for DVD Operation
“AUDIO OUTPUr. If “OFF” is
selected, there will be no sound.
(See page 60).
• Video CDs and CDs can be played
as normal.
Note:
• Some dts decoders which do not
support DVD-dts interface may not
work properly with the unit.
Optical digital audio
cable (optional)
To optical digital audio
input connector
Decorder with Dolby Digital/
dts processing (optional)
13