Cable box universal remote control feature, Universal remote control is, The universal remote control setup – Panasonic OMNIVISION PV-DM2791 User Manual
Page 32: Setup remote, Press power* to turn selected unit on or off, Press vot, fm, dvd or dss cable on the, Settovbfl.fm. dvd, Set to dss cable
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cable Box Universal Remote Control Feature
Universal Remote Control is...
The Remote Control may be set up to control some
basic DSS or Cable box functions.
The Universal Remote Control Setup
1
Find your DSS box or Cable box
Brand Code Number from one of
the charts on the next page.
Setup remote.
Hold down DSS CABLE
and press
number keys
to enter code.
• It code number is 100 or greater,
e.g., press l - 0 - 2 for 102.
3
Confirm code entry.
Press POWER*
to turn selected unit
ON or OFF.
* See below for controllable functions in each
mode.
• Please repeat the Universal Remote Control Setup
after replacing remote control batteries.
• The remote control will not operate all DSS receivers
or Cable Boxes made by the manufactures listed.
If you get no results, your particular brand cannot be
controlled.
Using the Universal Remote Control
(Available Buttons / Functions)
Once the remote control has been properly set up,
you can select TV-VCR, FM, DVD. DSS or CABLE
mode depending on which functions you wish to
control.
Press
VOT,
FM, DVD or DSS CABLE
on the
remote control to select the desired mode. (See below
for buttons available in each mode.)
SettovBfl.FM. DVD:
All TV functions, as well as functions of TV-VCR, FM,
or DVD.
Set to DSS CABLE:
• Basic VCR functions, e.g. PLAY, REC, etc.
• CABLE/DSS function, e.g. POWER, ENTER,
NUMBER keys (except 100 key), CH UP/DOWN.
32
For assistance, please call; 1-800-211-PANA(7252) or send e-malt to ; [email protected]