Panasonic OMNIVISION PV-DM2791 - Manual (Page 63)

DVDA/ideo CD/CD Correction
Play fails to start even when
PLAY is pressed... • This unit cannot play discs other than DVDs, Video CDs and
CDs.
• The disc may be dirty and require cleaning.
Play starts but then stops
immediately... • Be sure disc is installed with label side up.
Picture is distorted during rapid
advance or rapid reverse...
• The picture will be somewhat distorted at times: this is normal.
No Forward/Reverse search
play...
• Some discs may have sections which prohibit Forward/
Reverse search. (P. 21)
Play does not start even when
title is seiected...
• Confirm the “DVD LOCK" setting. (P. 58)
Audio soundtrack and/or
subtitie language is not the one
selected at the initial settings... • If the audio soundtrack and/or subtitle language selected at
DVD initial settings does not exist on the disc, it will not be
accessible.
No subtitles... • Subtitles appear only when available on disc.
• Select “ON” at the “Changing subtitle language" section (P. 50)
to display subtitles.
Alternative audio soundtrack
(or subtitle) language cannot
be selected... • Alternative language cannot be selected with discs which do
not contain more than one language.
• For some discs, alternative language cannot be selected with
the AUDIO or SUB TITLE button. Try selecting it from the DVD
menu if available.
Angle cannot be changed... • This function is dependent on software availability. Even if disc
has multiple angles, they may be recorded for specific scenes
only (ANGLE Indicator on unit lights up). (P. 51)
Miscellaneous Correction
Video cassette cannot be
inserted...
• Insert the cassette window side up; record tab facing you.
Video cassette cannot be
removed...
• Completely insert Power Plug into an AC outlet.
Eject does not function or
insertion cannot be done... • Turn the POWER off and then on, and try ejecting or inserting
the tape again.
Video cassette ejects when a
recording is started, or the
power is turned off for timer
recording...
• Make sure cassette record tab is intact. (P. 4)
The disc cannot be removed... • First, unplug unit. Then, prepare a rigid wire (e.g. an extended
paper clip, etc.) and, applying moderate force, insert it straight
into the hole at the base of the tray. The tray will eject a little.
Now, pull the tray all the way out and remove the disc. (P. 9)
In Stop mode, the VCR motor
(CYLINDER) continues to
rotate... • To enable Quick Play mechanism, the VCR cylinder will rotate
for about 3 minutes. This reduces response time from Stop to
Play mode and from Play to Rewind Search mode.
If you cannot resolve the problem, please call the Customer Call Center for product
assistance at 1-800-211-PANA (7262.)
To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262.)
or send e-mail to : [email protected]
63