Panasonic SD-BT10P - Manual (Page 12)

8
Twist the bread pan clockwise into its right
position.
Fold the handle down.
“Be sure the bread pan contacts the bottom of the oven area and twisted to settle into place.
If the bread pan is not placed correctly, the dough will not be kneaded properly.
Close the lid.
9
Plug into a 230 volt outlet.
—
BAKE
n-nni LIGHT
ui ‘ ut RAPID
DOUGH
The display will light up.
10
11
Basic breads
©smmisra. Press START pad.
И
BASIC
WHOLE
WHEAT
BAKE
LIGHT
RAPID
DOUGH
Rest begins.
* There will be no mixing action for approx.
30 minutes after the START pad is pressed.
(Time will be longer in hot temperatures.)
Whole wheat breads
SELECT
a
фштзюр
Press this pad to select
WHOLE WHEAT BAKE.
Press START pad.
BASIC
WHOLE
WHEAT
С ' П П
D u u
BAKE
UGHT
RAPID
DOUGH
Rest begins.
* There will be no mixing action for approx.
45 minutes after the START pad is pressed.
(Time will be longer in hot temperatures.)
—Operation begins in the rest condition to settle the temperature of the bread pan and ingredients.
— A clicking noise may be heard during operation. This is not a malfunction.
—If the indicating light blinks and the beeper sounds, see R16.
After rest, the process will proceed to knead, then to rise and finally, bake.
(For detailed information, see R4.) ------------------------------- The time remaining until
BASIC
WHOLE
WHEAT
BME
tji*l <n LIGHT
1 ■ u* u*
RAPID
. DOUGH
the bread Is finished is
displayed in hours and
minutes. (3:59, 3:58...)
The above display is for BASIC-BAKE mode.
—Each process is not shown on the display.
—The time required for each of the steps from rest to bake will vary slightly according to factors
such as voltage fluctuation and room temperature.
—During operation do not remove the pan, nor unplug the power cord.
The lid and body will be hot during baking. Do not touch them.
—11 —