Answering system, Memory capacity, Turning the answering system on/off – Panasonic 5.8 GHZ EXPANDABLE DIGITAL CORDLESS ANSWERING SYSTEM KX-TG6074 User Manual
Page 30: Base unit, Screening calls, Turning off the call screening feature, Note
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Answering System
Answering system
This unit contains an answering system
which can answer and record calls for
you when you are unavailable to
answer the phone.
Important:
• Only 1 person can access the
answering system at a time.
• When callers leave messages, the
unit records the day and time of each
message. Make sure the date and
time have been correctly set (page
14).
Memory capacity
The total recording capacity (including
your greeting message and voice
memo) is about 18 minutes.
A maximum of 64 messages can be
recorded.
• If the message memory becomes full,
the ANSWER ON indicator flashes
rapidly (if the answering system is
turned on). Erase unnecessary
messages (page 31).
• When the message memory
becomes full, the greeting message is
different depending on your situation:
- If you use the prerecorded greeting
message, the unit automatically
switches to another prerecorded
greeting message asking callers to
call again later.
- If you recorded your own greeting
message, the same message is still
announced to callers even though
their messages are not recorded.
Turning the answering
system on/off
Base unit
Press [ANSWER ON] to turn on/off the
answering system.
• When the answering system is turned
on, the ANSWER ON indicator lights.
• When the answering system is turned
off, the ANSWER ON indicator turns
off.
Screening calls
While a caller is leaving a message, you
can listen to the call through the base
unit’s speaker. To adjust the speaker
volume, press [A] or [V] repeatedly.
You can answer the call by pressing
[SP-PHONE] on the base unit, or by
pressing [*>] on the handset.
Turning off the call screening feature
When the base unit is not in use, press
[GREETING CHECK], then press and
hold [V] until the base unit beeps.
OR
While screening a call, press and hold
[V] until the sound goes off.
Note:
• If you adjust the speaker volume
while listening to messages or
communicating through the base unit,
the speaker volume for call screening
is turned on again.