Useful information – Panasonic 5.8 GHZ EXPANDABLE DIGITAL CORDLESS ANSWERING SYSTEM KX-TG6074 User Manual

Page 45

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Useful Information

Problem

Cause/solution

1 cannot set the alarm.

• In order to set the alarm, you must first set the date

and time (page 14).

• The handset has lost communication with the base

unit. Move closer to the base unit, and try again.

While programming, the

handset starts to ring.

• A call is being received. Answer the call and start

again after hanging up.

Battery recharge

Problem

Cause,'solution

I fully charged the

battery, but

i

?!

continues to flash, or

1 ! is displayed.

• Clean the charge contacts and charge again (page

11).

• The battery may need to be replaced with a new one

(page

10).

The handset display is

blank.

• Confirm that the battery is properly installed.
• Fully charge the battery (page 10).

While charging, the

charge indicator does
not light and

“Charge

for 7h”

is displayed.

• The battery is empty. The charge indicator does not

light in order to concentrate on charging. After about 5
minutes, the charge indicator lights and

“Charging”

is displayed.

Making/answering calls, intercom

Problem

Cause/solutlon

Static is heard, sound
cuts in and out.

Interference from other

electrical units.

• Move the handset and base unit away from other

electrical appliances.

• Move closer to the base unit.
• Turn on the clarity booster feature (page 18).
• If your unit is connected to a telephone line with DSL

service, we recommend connecting a noise filter

between the base unit and the telephone line jack.

Contact your DSL provider for details.

The handset and base

unit do not ring.

• The ringer volume is turned off. Adjust it (page 16,

28).

1 cannot make a call.

• The dialing mode may be set incorrectly. Change the

setting (page 14).

• The base unit or another handset is in use. Try again

later.

1 cannot have a

conversation using the
headset.

• Make sure that an optional headset is connected

properly (page 42).

• If

“sp-phone” is

displayed on the handset, press

[•>] to switch to the headset.

For assistance, please visit http://www.panasonic.com/heli

Advertising