Panasonic KX TGA420B - Manual (Page 12)

Registration
This station unit must be registered at the KX-TG4000B/KX-TG2000B base
unit. The station unit will be assigned the extension number at registration.
Only one unit can be registered at a time using the base unit. If the PIN
has been stored, see page 13.
Make sure that the base unit and station unit are in the standby mode.
Registration must be completed within 1 minute.
J
Base unit:
Press I FUNCTION I.
2 Press V or A until the arrow points
to
“Registration”,
and press ►.
3 Press V or A until the arrow points
to
“HS registration”.
4 Press ►.
5 station unit:
Press [ FUNCTION I.
^ Press V or A until the arrow points
to
“Registration”,
and press ►.
^ While “HS
registration”
is at the
arrow, press ►.
3 Base unit/station unit:
Wait until a beep sounds on the base
unit and station unit and until both of
the displays show the assigned
extension number.
Ex. Extension number is 2.
• To return to the standby mode, press
(
ex
E).
• The extension number will be displayed
on the station unit.
P a g e r s e t t i n g
► R e g i s t r a t i o n
i n i t i a l i z a t i o n
S e t P I N
► H S r e g i s t r a t i o n
D e r e g i s t r a t i o n
H a n d s e t
r e g i s t e r i n g
Voice mail
Pager setting
►Registration
►HS registration
Deregistration
VA ►=Set
Handset
registering
Station unit
Handset2
registered
Base Unit
H a n d s e t 2
r e g i s t e r e d
72
If the station unit displays “Enter PIN” in step 8, follow steps 3 to 5 on next
page.