Panasonic KX TGA420B - Manual (Page 22)

Intercom
You can talk to the operator (base unit user) or another extension user
(cordless handset user or another station unit user) using the intercom line.
The extension number is assigned at registration to the station unit
(p. 12, 13). The base unit has the number “0”.
Making Intercom Calls
I
Press (INTERCOM 1.
Press extension
No. to call
2 To page the operator (base unit), enter ®
To page another extension (cordless
handset/another station unit), enter the
number ({T| to [s)).
Ex. Ext.2 paging Base Unit
Calling [ 2 ] -> [ 0 ]
• The paged unit rings.
• To stoD Daaina. press lINTERCOMl.
• After the paged party answers, the display will
show the length of the call.
Intercom
00-00-00
3 When the other party’s voice is heard, lift
the handset off the cradle or talk into the
MIC (microphone).
4 To end the intercom, replace the handset
on the cradle or press [ digital sp - phone 1.
Off
00-07-15
Answering Intercom Calls
After the rings, lift the handset off the cradle or
press
[DIGITAL SP-PHONEl.
Ex. Base Unit paging
Extension 2
To end the intercom, replace the handset on the
cradle or press
( digital sp - phone 1.
(aE
Call[2]t-[0]
During an intercom call:
• If an incoming call is being received, you will hear two tones (incoming call
tone, p. 37). To answer, press the relevant line button.
• If the unit detects a problem, an error message will be displayed (p. 64).
► When the ringer volumes is set to OFF, the station unit will not ring (p. 16).
22