Panasonic KX TGA420B - Manual (Page 36)

other Programmable Settings
Calling Line Selection
The station unit will automatically select a free line when you make a call.
You can change the calling line selection.
Make sure that the station unit is in the standby mode.
y Press!FUNCTION 1.
Save directory
Ringer setting
►Line selection
Line selection
:Auto
VA ENTEi6=Save''
Press V or A until the arrow points to
“Line selection”,
and press ►.
• The current setting is displayed.
Auto;
A free line will be selected (LINE 1 has priority)
when making a cal) (factory preset).
Linel: Line 1 will be selected when making a call.
Line2: Line 2 will be selected when making a call.
Line3; Line 3 will be selected when making a call (for users registered to
KX-TG4000B only).
Line4: Line 4 will be selected when making a call (for users registered to
KX-TG4000B only).
Line select^i-on ^
:Jjinel ]
VA ENTER^Save"'
3 For users registered to KX-TG4000B:
Select
“Linei”, “Line2”, “Line3”, “Line4”
or “Auto” by pressing v or A.
For users registered to KX-TG2000B:
Select
“Linei”, “Line2”
or “Auto” by pressing v or
a . (Do not
select
“Line3”
or
“Line4”.)
4
Press fENTERl.
• A beep sounds.
• To return to the standby mode, press [EXIT].
• Any line can be selected manually, regardless of the programmed line selection,
by pressing that line button. If registered to KX-TG2000B, the [UNE^I and
fUNE 4l buttons are inoperative.
n
t For users registered to KX-TG2000B: I
Do not select
“Line3”
or
“Line4”
for the calling line selection. Otherwise j
“Line not available”
will be displayed when you lift the handset off ;
the cradle or press I DIGITAL SP-PHONEl to make or answer a call.
36