To erase the recorded greeting message – Panasonic KX TGA420B User Manual

Page 45

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

1

. Press

[VOICE

mail

!

while the station unit is in the standby mode, and lift

the handset off the cradle.

• If the direct access mode is OFF (p. 41), enter the mailbox password and press

d).

• If you have new messages, listen to all of them.

2. Press (^, then press (T).

3. After the tone, talk clearly using the handset. To end, press (T).

4. Press d).

5. Replace the handset on the cradle.

• Announcements and the message will be heard through the handset instead of

the speakerphone.

• You can adjust the handset volume by pressing A or V .

To erase the recorded greeting message

1. While the station unit is in the standby mode, press IVOICE

mail

I.

• If the direct access mode is OFF (p. 41), enter the mailbox password and press

(D.

• If you have new messages, listen to all of them.

2. Press d].

3. Press (D again while the message is being played.

4. Press fvoiCE MAI

l

].

• The unit will answer with the pre-recorded greeting message (p. 44)._________________

• In step 1, you can lift the handset off the cradle after pressing [VOICE MAIL).

To record a personal greeting message using the handset

CO

For assistance, please call: 1-800-211-PANA(7262)

45

Advertising