Panasonic KX TGA420B - Manual (Page 69)

Problem 1 Remedy
The unit exits the Caller
list/directory while you are
viewing it.
• Do not pause for over 60 seconds while
searching.
You cannot register the unit
at the base unit. •The battery needs to be charged. Connect
the AC adaptor to charge the battery fully
(p. 9).
When a second call is
received on the same line,
the unit does not display
the new caller’s
information.
• If another call is received on the same line
while;
- the Automated Attendant System or
Answering System is responding to a call,
or
- a call is placed on hold,
the caller information will not be displayed.
You cannot redial the last
number dialed.
• If the last number dialed was more than 32
digits long, the number will not be redialed.
• Access numbers entered after pressing
iTONEl will not be included when redialing.
• The iREDIALl button also functions as the
[PAUSEl button. It will redial the last
number dialed if pressed at the outset of a
call (p. 19). If another number has been
dialed first, it will operate as a pause button
{p. 34).
You cannot have a
conversation using the
headset.
• Make sure that the headset is plugged into
the headset jack properly (p. 60).
• If
“ENTER=Headset”
is displayed, press
1 ENTER] to switch from the speakerphone
to the headset.
“Recharge”
is displayed,
“1_li” flashes or the unit
beeps intermittently.
• Connect the AC adaptor to charge the
battery fully {p. 9).
You charged the battery
fully, but
“Recharge”
is still
displayed and/or “dll”
still continues to flash.
• Install a new battery (p. 59).
5
(D
Q>
o'
o
For assistance, please call: 1-800-211-PANA(7262)