Press [program/2way rec), Pager call – Panasonic KX-TCM943-B User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^ Pager Call
Storing the 1-800 pager number
If you use a 1-800 pager number with your PIN code, store the pager
number as follows.
1
2
3
4
Press [PROGRAM/2WAY REC).
•The TALK indicator flashes.
Press f SCREEN/PLAYBACK1.
•The indicator lights.
•“P” is displayed on the base unit.
Press
a) Enter the 1-800 pager number
and then press (REPIAL/PAUSE)
3 times.*
b) Enter the PIN code and then
press iREDIAL/PAUS^ twice.*
c) Enter the call back number to
be displayed on the pager
(the number where your unit is
connected).
d) Press if required by your
pager company, to end the call.
• If you misdial, press
(PROGRAM/2WAY REC ] then Start
from step 1.
•You can enter a total of 48 digits.
When finished, press
[PROGRAM/2WAY RECl.
•The indicator lights go out.
and Indicator
*Your pager company requires a delay after the pager number is dialed.
Contact your pager company regarding the required pause time.
Pressing (REDiAL/PAUSEl once creates a 3.5 second delay and counts
as one digit.
40