Panasonic KX-TCM943-B - Manual (Page 56)

Before Requesting Help
Cordless Telephone
Problem Remedy
An alarm tone sounds
when you press (TALK).
[REMOTE SP),
fSCREEN/PLAYBACK) or
[INTERCOM!.
•You are too far from the base unit.
Move closer and try again.
• Place the handset on the base unit and
try again.
• Plug in the AC adaptor.
• Raise the base unit antenna.
Static, sound cuts in/out,
fades. Interference from
other electrical units.
• Locate the handset and the base unit
away from other electrical appliances
(p. 3).
• Move closer to the base unit.
• Raise the base unit antenna.
• Press [CH] to select a clearer channel.
The handset does not ring. •The ringer volume is set to OFF. Press
[RINGER) briefly while the TALK indicator
light is off (p. 13).
The base unit does not
ring.
•The ringer volume is set to OFF. Press
[HOLD/RINGER! briefly while the DIGITAL
SP-PHONE indicator light is off (p. 13).
You cannot store a phone
number in memory.
•You cannot store a number while the unit
is in the talk, hold or intercom mode.
• Do not pause for over 30 seconds while
storing.
While storing a phone
number, the unit starts to
ring.
•To answer the call, press [TALK],
(REMOTE SP) or [DIGITAL SP-PHONE ].
The program will be canceled. Store the
number again.
[ LOCATOR/INTERCOM1
does not function.
•The handset is too far from the base unit
or is engaged in an outside call.
i^DIAL/PAUSE] does not
function properly.
• It will redial the last number dialed if
pressed at the outset of a call (p. 22). If
another number has been dialed first, it
will operate as a pause button (p. 33).
56
i