Panasonic KVS2055L User Manual
Operating instructions, Panasonic, High speed scanner
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Panasonic
High Speed Scanner
Operating Instructions
Model No.
KV-S2055L/KV-S2055W/
KV-S2055LU/KV-S2055WU
These instructions contain the information on operating the scanner. Before reading
these instructions, pJease go through the installation mfanuaJ enclosed with this unit.
Please carefully read these instructions, the enclosed instaHlation manual and
maintenance manual Keep these documentation irv safe place for future reference.
Advertising
Table of contents
Document Outline
- Panasonic
- Model No. KV-S2055L/KV-S2055W/ KV-S2055LU/KV-S2055WU
- Federal Communications Commission Requirements
- For your safety please read the following text carefully.
- For roller cleaning paper
- English
- Français
- Deutsch
- Operating Environment
- IDisplay panel and keys
- ►
- ◄
- ■Setting the scanner
- ISelecting the paper path for scanned document
- ISetting the ADF/manual feed selector
- IRemoving paper jams from the scanner
- IRemoving paper jams from the exit part
- lOutside of the scanner
- Inside the scanner
- ICIeaning the rollers
- ICIeaning the scanning section glass, white sensor rollers, document sensors and double feed detection sensors
- IRoller cleaning paper
- Hold the conveyor using both hands, and close the conveyor by pushing it into the unit
- Close the front door.
- Disconnect your scanner from the electrical outlet and the interface cable.
- Fold the plastic part of the exit stopper and put the exit stopper into the exit extension tray. Slide the exit extension tray into the pre-imprinter door if it is pulled out.
- Remove the SCSI interface board.
- Attach the screw, fixture and sheet for transportation.
- Pack the scanner.
- Specifications