Panasonic KVS2055L - Manual (Page 10)

Component Identification
Exit substopper
Exit extension tray
Exit stopper
Document guide
Hopper extension
tray
Hopper
Front door release
Inside the front door.
Post-imprinter door
(Back door)
Used for attaching the imprinter
unit and ink cartridge.
An imprinter unit installed here
is called a post-imprinter.
Connectors
Used to connect the
scanner unit to the
host computer.
AC inlet
Power cord
Exit document
guide
Use this when
required.
Power indicator
When the power is
turned on, the green
indicator lights.
When an error occurs,
the indicator will
change to red, and
light steadily or flash.
Power switch
t : on position
O : off position
Display panel
When performing
each setting, used
to display the
scanning conditions,
etc.
Front door
Pre-imprinter door
(Top door)
Used for attaching the
imprinter unit and ink
cartridge.
An imprinter unit
installed here is called
a pre-imprinter.
ADF/manual
feed selector
To prevent double
feeding, adjust the
selector to feed the
scanning document
properly.
(Refer to page 28.)
Fan exhaust vent
Paper path selector
Used to change the scanning document's
path direction (front side/back side).
(Refer to page 28.)
1 0