Iselecting the paper path for scanned document, Isetting the adf/manual feed selector, Single scanning – Panasonic KVS2055L User Manual
Page 28: Continuous scanning, Selecting the paper path for scanned document, Setting the adf/manual, Feed selector, Secondary settings
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Secondary Settings
ISelecting the paper path for scanned document
To select the front, set the paper path
selector to the upper side.
To select a straight path pass through
to the back, set the paper path selector
to the lower side.
• When scanning documents with a thickness
of 0.2
mm
to 1
mm,
like folded documents, set
the paper path selector to straight.
(5!.
-8-*
Paper path selector
The paper path selector is located on the left side
of the scanner.
ISetting the ADF/manual feed selector
Single scanning
When scanning a single sheet or
several
sheets,
set
the
ADF/
manual feed selector to/'MANUAL".
Continuous scanning
When
scanning
normal
paper
continuously, set the ADFXmanual
feed selector to "2".
When scanning with smooth sided
paper or a paper jam occurs with
normal paper, set the ADF/^manual
feed selector to "3".
When
double
feeding
occurs
frequently or scanning a document
with a rough face as in NCR paper,
set the ADF/manual feed selector
to "1".
When a jam occurs at the paper feed
component,
set
the
ADF/manual
feed selector to "4".
•
The ADFXmanual feed selector must be
set in the chosen specific position for
this setting to function properly.
•
If double feed alarm beeps frequently,
change the ADFXmanual feed selector.
1------ADF ADJ.
MANUAL
ADF/manual feed selector
The ADF/manual feed selector is located on
the left side of the scanner.
28