Panasonic TX-29F155A - Manual (Page 25)

(Advanced Remote Control Transmitter Operation^
■ Remote control setting for VCR’s and DVD’s
Remote Control Operation is possible for the Panasonic VCR’s and DVD’s
equipment.
After completion of setting, execute the various operations after pressing the
VCR/DVD selection switch.
© ® 0
0 0®
0 0®
(S SSCZ)
1
an
Switch to select VCR or DVD.
While pressing the VCR/DVD Power button, press the
manufacturer code {enter the two digit code), and press the
VCR/DVD Stop button.
0 ® 0
0 0 0
® 0 0
0
ra
VCR DVD PLAYER
Manufacturer Code
Panasonic/National 10,11,12,13
Manufacturer Code
Panasonic 70,71
Note: After setting, execute operation confirmation, if there is
no operation, set a different code.
Helpful Hint
1. The respective VCR/DVD code is cancelled when battery has been exchanged.
Please set it again.
2. Depending on the model, operation of VCR’s or DVD’s of the manufacturers listed above may not be possible.
3. In some cases, new products may not be operative.
4. It will not operate with other than the above manufacturers.
VCR / DVD
The Remote Control is capable of operating some functions of selected Panasonic VCRs and DVD (Digital
Versatile Disc) equipment. Some VCR and DVD equipment have different functions. So to ensure compatibility,
please refer to the equipment’s instruction book or consult your dealer for details.
5- cnci----
9---- |-£g3 jgJC^CE
3—
Function (VCR/DVD)
1 Play button
2 Rew (Rewind) / Review button
3 Stop button
4 Power button
5 VCR REC (Record) button
6 Pause / Still button
7 FF (Fast Forward) / Cue button
B VCR and DVD Select button
9 Programme Number Left and Right buttons for VCR
Programme Skip button for DVD
25