Panasonic TX-29F155A - Manual (Page 8)

(^General Operation)
14 tjofv Stereo/BNingual Sound Selection Button
Sound output modes can be selected by pressing the “Sound Selection” button.
STEREO, BILINGUAL (if transmitted) and MONO modes can be selected using this button.
Audio Signal Mode Indicator
STEREO CD
MAIN! I
SUBII 11
MONO V
Type of broadcast Mode Indicator
Regular broadcast
(Standard Audio)
No Indicators V
Regular
s
<
+
NICAM MONO I
V
o (MAIN 1)
NICAM STEREO 0><^ V
NICAM DUAL MONO 1 11
(MAIN I/SUBII)
C
<9
£
Regular broadcast
(Standard Audio)
No Indicator <r^ V
d> BILINGUAL or DUAL MONO
I^II
s ; MAIN I/SUB 11
9
STEREO CD^ V
Notes:
1. The “A2 (German)” stereo/billngual TV sound transmission system is used in the following
countries; Australia, Malaysia, Thailand, Indonesia, etc. The “NICAM” stereo TV sound
transmission system is used in the following countries: New Zealand, Singapore, Hong
Kong, Thailand, China and Malaysia.
2. if the stereo signal is poor or the receiving conditions are not optimum or if STEREO;
MONO automatic switching occurs, it is recommended you switch from STEREO to
MONO. When the broadcasting mode changes to “STEREO", or “MONO” after you have
selected “MONO” mode, change over “STEREO' mode wilt be made automatically.
3. Even when the contents of the receiving signal undergo changes, selection mode is kept
intact.
4. When the receiving conditions deteriorate, listening will be easier if the mode is set to the
“MONO’ position, using the stereo/bilingual sound selection button.
5. “DUAL", also known as “DUAL MONO’ or as “BILINGUAL” is not currently transmitted in
some countries.