Panasonic EB-G500 - Manual (Page 21)

Function Operation
Price Per Unit ID] i I €B
The current setting will be displayed. Press to change the current setting.
Enter the PIN2 and press Enter a new price per unit, use B to enter a
decimal point. Press ® to set the price. Select the required currency by pressing
® or ®. Press to set the new price per unit.
Cail Limit (Z) Dl O SB CB
Call limit is used to limit length of use to a specified number of units.
During conversation the number of remaining units will be displayed. When the
number reaches the specified level, a warning will be given and when the number
of units has expired, the current call will end.
To display the current call limit and warning levels press ® or ®. Press (33 to
change the current settings. Enter the PIN2 and press (33. Enter the number of
units for a new call limit, to disable call limit set this to zero. Press (!1^ to set the
call limit. Enter the number of units for the call limit warning, and press (!1^.
Call Bar (3
) Call bar
CBAII outgoing
9 Outgoing International
A 9 Outgoing international except home
g| £S All incoming
# 9 Incoming while roaming
Status
CB New password
Call Bar is used to restrict certain outgoing and/or incoming calls. Any combination
of call restrictions can be set.
Call Bar is controlled by a security password that is supplied by your Service Provider.
When updating or checidng the status of caii bar the tetephone must be registered
with a network.
1. <- ALL CALLS: Restricts all outgoing calls.
2. <- INTERNAT: Restricts outgoing international calls.
3. <- INTxHOME: Restricts outgoing international calls except those to your
home country.
4. ^ ALL CALLS: Restricts all incoming calls.
5. ^ WHEN ROAM: Restricts all incoming calls when roaming.
17