Panasonic EB-G500 - Manual (Page 22)

Function Operation
Set Call Bar flS call bar type
Select “SET?” or “CLEAR?” by pressing ®
or
®, then Enter the password.
Press
B
to update the call bar status with the network.
Call Bar Status (3
Press
B
to check the call bar status, this may take a while to update.
To see further levels of call bar status, press ® or ®.
Change Password flS @ B
Enter the current password. Enter a new password (four digits).
Enter the new password again.
Press
B
to update the new password with the network.
Divert (S
€B Divert
(■All calls
A 9 If busy
@1 9 No answer
# GB Unreachable
9 Status
Divert Is used to forward Incoming calls to another telephone, not necessarily a
GSM telephone.
When updating or checking the status of divert the tetephone must be registered
with a network.
1. ALL CALLS: Diverts all calls.
2. IF BUSY: Diverts If you are busy.
3. NO ANSWER: Diverts If you do not answer.
4. UNREACH: Diverts If you are out of service or switched off.
Set Divert flS E9 call divert type
Select “SET?” or “CLEAR?” by pressing ® or ®, then (33.
Enter the telephone number to which calls will be diverted, this can be recalled
from a memory. Press to enter the telephone number.
If you selected “NO ANSWER” press ® or ® to select a delay time (five to thirty
seconds in five second steps) then press (!1^.
Press
B
to update the divert status with the network.
18