Panasonic KV-SS25D - Manual (Page 11)

Loading a Document
4
Adjust the document guides to the docu­
ment size.
• Make sure to properly align the documents to
the document guides.
5 When using legal paper, pull out the exten­
sion tray from the document tray as shown
in the illustration.
Caution :
• For thin or thick paper, scan the document using single paper feed. Also, remove the document from the
exit tray after it is scanned.
• The scanner will accept 13 to 27 lb paper for continuous scanning and 11 to 34 !b paper for a single
scan.
• You can load up to 80 sheets of 20 lb paper (limit mark of the document guide). Never allow the amount
of documents in the tray to exceed the fill indicator. Reduce the number of documents in the tray if they
are thick, creased, or curled.
• Be sure to remove the document from the exit tray after it is scanned.
•
Especially when reading an important document, in case of a paper jam or damage to the document,
make a copy and use it to scan into the unit.
Types of Documents to Avoid :
• OHP sheets, other plastic film, cloth, or metallic sheets.
• Paper with irregularities such as tabs, staples, paste etc.
• Documents with wet ink.
• Thick or irregular documents such as envelopes, paste, ups, etc.
• Coated documents, photos.
• Copying paper such as carbons or carbonless paper. (Chemically treated carbonless forms)
Note: Scanning chemically treated paper will result in premature wear of paper feed roller.
• Damaged or wrinkled documents.
• Unusually shaped documents.
• Tracing paper.
11