Adjustment of the automatic-start position, Clamp the tonearm, Remove the dust cover – Panasonic SL-J120 User Manual

Page 5: Adjust to the desired automatic<start posi* tion, Attach the dust cover, Replacement of the stylus, Replacement of the cartridge, To clean dust from the stylus, Adjustment, Replacement

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Adjustment

Adjustment of the automatic-start position

This adjustment is preset at the factory. If play starts from the middle of a tune, or the stylus descends outside the disc circumference, make the

necessary adjustment.

1. Clamp the tonearm.

2. Remove the dust cover.

3. Adjust to the desired automatic<start posi*

tion.

4. Check to be sure the automatic-start position is correct.

Perform steps 3-7 on the opposite page (Automatic play) to check the position.

5. Attach the dust cover.

Replacement

Replacement of the stylus

If noise is heard from new discs, the stylus is probably worn.

Replace it with a new one.

•Stylus life................................................................. approx. 1000 hours

•New stylus ...............................................................................EPS-24CS

Ф Remove the tape on side of cartridge.

@ Pullout

the old stylus.

@ Insert the

new stylus.

/ No gap!

Don't touch stylus tip!

Maintenance

Replacement of the cartridge

The plug-in type of cartridge ITIPI is already designed to match this

unit in every respect: weight, correct stylus pressure, stylus tip
position, center of gravity, etc. This means that there's no longer

any need for troublesome connection of lead wires or adjustment of

the stylus pressure.

To clean dust from the stylus

Use a soft brush or similar material to gently remove the dust.

Thoroughly clean your discs occasionally with a high-quality disc

cleaner.

^^Carefully.. .in the arrow direction!

Maintanance of external surfaces

To clean this unit, use a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth, dipped into a
soap-and-water solution or a weak detergent solution.

Wring the cloth well before wiping the unit.

Wipe

once again with a soft, dry cloth.

Never use alcohol, paint thinner, benzine, nor a chemically treated

cloth to clean this unit.
Such chemicals may damage the finish of your unit.

-

5

-

Advertising