Panasonic DMC-TZ2 - Manual (Page 12)

■/Prèjpar'afiòns ■ f Jsillifj 'jr”n fT li if/'Ibi. e
fContlnyed)
• Default setting outlined:
Settings also reflected in SIMPLE MODE W (R28).
Settings also reflected in CLIPBOARD mode (P.58).
»))) BEEP"'' Change or mute beep sounds. Volume: ® (mute) / |iQ )| (low) /t(]0) (high) Tone: | .#| / ; j @ / #
SHUTTER
<]))) VOLUME «
■Change or mute shutter sounds.; ' ' ( '
Adjust volume of sound from speakers (7 levels).
Volume: ¿2. (mute) /E (low) /¿1 (high) Tone: | # | / M i M
LEVELS LEVELS
• Cannot be used to adjust TV speaker volume when connected to TV.
HI NO. RESET"
Reset image file numbers and start again from 0001'
;#F(ie numbers and folder numbers (P.75) ...........................
YES/NO . . :.. ■ :■ ..... ::... . : .. . . ' .
.. Numbers .cannot be reset once folder number reaches 999. in this case, save ail .
necessary pictures to your computer, and format the built-in memory/card. (P73) .
. To reset folder number to 100: : ■ . ■ : f
First, format (P73) the built-in memory or card, and reset the file numbers using NO.
RESET. Then, select 'YES’ on the foider number reset screen.............................
S(R RESET
K VIDEO OUT :
Reset SETUP menu (P.20) and REC menu items (P.50) to
their default settings.
Change the video output format when connected to a TV, etc.
RESET REC. SETTINGS? (YES/NO) RESET SETUP PARAMETERS? (YES/NO)
• Resetting SETUP parameters causes the following to be reset: Birthdays in BABY
(P.42) and PET modes (P.44), ‘TRAVEL DATE’ (P.48), ’WORLD TIME’ (P.49), ‘ZOOM
RESUME’ (P.20), ‘FAVORITE’ in PLAY menu (set to ‘OFF’) (P65), ‘ROTATE DiSP’ (set
to ‘ON’) (P.66), CLIPBOARD menu (INITIAL DISP.) (set to ‘ON’) (P.60)
(Only ‘BEEP’ is reset in the SIMPLE MODE menu.)
iSFolder numbers and clock settings will not be reset.
I NTSC i / PAL : : : :
@ TV ASPECT
Change the aspect ratio when connected to a TV. etc
(PLAYBACK mode only).
isi/ n
I When set to M, pictures will be displayed vertically long on LCD monitor when
connecting AV cable (supplied) (P.79).
SCENE MENU Display scene menu when mode dial is set to SCN1 or SCN2.
DIAL DISPLAY *■'’2 Display mode dial operation on screen.
LANGUAGE ;Change display language.
OFF (use previously selected scene mode) /1 AUTO | (displays scene menu)
•To display scene menu when set to‘OFF’: Press’MENU/SET. '...................................... '....'....'....'....
OFF/1 ON I (display)
I ENGLISH 1/ DEUTSCH (German) / FRANÇAIS (French) / ESPAÑOL (Spanish) /
ÍTALiANO{lta!ian)/ iÍ!X" (Chinese)/ 0$:ii (Japanese)'
* Not displayed on DMC-TZ3P/DMC-TZ2P...............................................................................................
22
VQT1B61 VQT1B61
23