I.mindard, Accessories – Panasonic DMC-TZ2 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

'.''i.Mindard

Accessories

Part numbers are as of January 2007

■Do a test

shot

first!

• Check first to see if you can take

pictures and record sounds {motion
pictures/pictures with audio)

successfuily.

IWe will not compensate for failed/

lost

recording or for direct/indirect

damage.

• Panasonic will not provide

compensation even if damage is

caused by faults with camera or card.

■Certain pictures cannot be played

back

• Pictures edited on a computer
©Pictures taken or edited on a different

camera
(Pictures taken or edited on this camera
may also not be able to be played back

on other cameras)

■Software

on the CD-ROM supplied

The following actions are prohibited:

• Making duplicates (copying) for sale or

rent

• Copying onto networks

■LCD monitor characteristics

Extremely high precision technology is

employed to produce the LCD monitor

screen. However there may be some dark
or bright spots (red, blue or green) on the
screen. This is not a malfunction.
The LCD monitor screen has more than

99.99% effective pixels with a mere
0.01% of the pixels inactive or always lit.
The spots will not be recorded on pictures
on the built-in memory or a card.

■Avoid shocks, vibration, and pressure

#Avoid exposing the camera to strong

vibration or shock; e.g. dropping or
hitting the camera, or sitting down with

the camera in your pocket.

• Do not press the lens or the LCD monitor.

■Do not get the camera wet or insert

foreign objects

• Do not expose the camera to water,

rain, or seawater.
(If camera gets wet, wipe with a soft,

dry cloth. Wring cloth thoroughly first if

wet with seawater, etc)

•Avoid exposing lens and socket to dust

or sand, and do not allow liquids to leak

into gaps around buttons.

■Avoid condensation caused by sudden

changes in temperature and humidity

• When moving between places of

different temperature or humidity, place
camera into a plastic bag and allow to
adjust to conditions before use.

• if the lens clouds up, switch off the

power and leave for about two hours to
allow camera to adjust to conditions.

• if the LCD monitor clouds up, wipe with

a soft, dry cloth.

'imm

*

LCD monitor

■I®

IWhen transporting

□ Battery Pack

• Switch off power.

CGA-S007A

We recommend using a genuine leather (P.14)

case (DMW-CT3, sold separately).

sunlight.

• If dirty, clean with soft,

dry cloth.

■Optional

accessories (P.96)

• Cards are optional. You can record

or play back pictures on the built-in

memory when you are not using a card.
(P.26)

• If any accessories are lost, customers

in the USA should contact Panasonic’s

parts department at 1 800 833-9626
and customers in Canada should
contact 1 800 99-LUIVIIX (1-800-995­
8649) for further information about

obtaining replacement parts.

(referred to in this manual as ‘battery’)

DBattery Charger

DE-A45B
(P.14)

(referred to in this manual as 'charger')

D Battery Carrying

Case

VYQ3680

(P91)

D Strap

VFC4090

(P.12)

’’

'//

10

VQT1B61

DUSB

Connection

Cable

K1HA08CD0007

^ ■

(P.74, 76)

□ AV Cable

K1HA08CD0008
(P.79)

□ CD-ROM

The following software on the CD-ROM
is referred to in this manual as 'supplied
software’.

• LUMIX Simple Viewer
«PHOTOfunSTUDIO -viewer-

VQT1B61

11

Advertising