Tape operation, To cancel, press play or stop, Example 2 – Panasonic Combinatin VCR AG-513E User Manual

Page 24: Search system is, Index search

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Tape Operation

Search System is...

Each time a recording is made, an invisible index mark is placed on the tape.

When timer recordings are made, program index and information is also included.

These index marks can be used to access or scan recordings.

Index Search

Go directly to the desired recording.

1

Press SEARCH

in Playback or Stop

mode to display INDEX SEARCH

screen.

INDEX SEARCH

ENTER INDEX NUMBERil
USING 1-9 KEYS

FORWARD SEARCH :FE
REVERSE SEARCH:REW

NEXT:SEARCH
EXIT:STOP

1) Press number

keys

to select

the recording

number.

• To calculate

number, see below.

2)

Press FF

or

REW

to start search.

IN№X SEARCH

FORWARD SEARCHiFF
REVERSE SEARCH:HEW

Play begins at search end.

To search forward or back

1

index,

press FF

or

REW

while screen left is
displayed (10 seconds).

To cancel, press PLAY

or

STOP.

■ To calculate the Index Number

Example 1:

To go to rec. 2 from rec. 4, enter 3 and press REW.

1 f

)

1 1 I 2

3

4 1 5

6

7

Example 2:

To go to rec. 6 from rec. 2, enter 4 and press FF.

NOTE; f indicates start points of each recording.

24

1

h

2

3

1

^

L

l

I

6

7

• Make each entry within 5 minutes, or the

Index Search mode will be canceled.

• If Index Search is started very close to an

index mark, that index mark may not be

counted in the search.

Advertising