Panasonic OMNIVISION PVQ-1310 - Manual (Page 36)

On-Screen Display (OSD)
VCR Status & Clock Display
To display or remove the
overlay.
Press DISPLAY.
Function Status Channel Caption
Current Time
Rec Time Remaining
(OTR moc
page 13.)
. , REC 12;00PM ABC
(OTR mode oniy see —|- o :
25
-o :
12
; |4
12/27/1999 MON
12:00PM -
1:00PM
CH 08 ABC MOVIE
MEMORIAL MOVIE
Counter
'Tape Speed
Time Stamp Data (See page 26, 27.)
Blue Screen Display
Whenever a biank section of a tape
comes up in Play mode, or when the
selected channel has no broadcast
signal with the “Weak Signal Display
ON/OFF” (see page 28) set to “OFF,”
the TV screen will turn solid blue.
Channel & Function Display
When a function button is pressed (PLAY, FF, etc.) or you
change channels, the unit mode or channel number will be .
displayed. (Some station names may also appear if Channel
Caption is set. See pages 24, 25.)
Warning and Instruction Displays
These displays will alert you of a missed
operation or provide further instructions.
OSD Caution Page
NO CH FOUND PLEASE CHECK
ANTENNA CABLE CONNECTION THEN
PUSH CH UP KEY AGAIN
• If no active channels are found for CHANNEL MEMORY... 7
PLEASE SET CLOCK BEFORE
PROGRAMMING • If you attempt to set or review a Timer Recording or set the
On-Timer and the Clock is not set...
8, 9,34
CHECK CASSETTE RECORD TAB • If you press REC, and a cassette is inserted with no record tab... 6,13
TO CANCEL TIMER REC HOLD DOWN
STOP KEY FOR APPROX 3 SEC
• If you press STOP during a Timer Recording... 15
NO CASSETTE
PLEASE INSERT A CASSETTE
• If you press PLAY, FF, REW, or REC without a cassette
inserted...
12, 13
PLEASE PREPARE FOR TIMER REC • If the unit is not in Stop mode or a cassette with record tab is not
inserted two minutes before a Timer Recording is about to begin...
14,15
VIDEO HEADS MAY NEED CLEANING
PLEASE INSERT HEAD CLEANING
CASSETTE OR REFER TO MANUAL
END: PLAY KEY
• If head cleaning becomes necessary while playing back a
tape...
35
VCR LOCK ACTIVATED • If you press a function button other than STOP/EJECT or
POWER while the unit is in VCR Lock mode...
26
36
For assistance, call 1-800-211-PANA(7262)